posted: 2024-02-04
Jellybeans on Parade
Overview
While looking through M.A.I.L. for a new weave to try out, I came across Jellybeans on Parade by ELvenleaf. Jellybeans on Parade is a variant of Rhinos Snorting Drano, with the difference being the direct connection of the core 3-ring units instead of using an extra ring. I have included a tutorial for those interested in trying this weave at home, as I could not find any free tutorials.
Materials
For the sample piece showcased in this post, I made the rings myself (bonus post coming soon if you are interested). I used 16 SWG Bright Aluminum wire from The Ring Lord coiled around a 7mm mandrel for an approximate aspect ratio of 4.3.
Tutorial
-
Start with a 1-2-1 chain as shown below:
-
Add 1 new ring(green in the image below) through the center 2 rings from step 1(yellow in the image below). When done, it should look something like this:
-
Add 1 new ring(green in the image below) around the eye formed by the center 2 rings from step 2(yellow in the image below). When done, it should look something like this:
-
Add 1 new ring(green in the image below) around the eye formed by the rightmost 2 rings from step 2(yellow in the image below). When done, it should look something like this:
-
Add 1 new ring(green in the image below) through the eye of the rightmost 2 rings from step 2(yellow in the image below). When done, it should look something like this:
-
Repeat steps 2-5, targeting 2 on the same target as your last step 5 and steps 3-5 on the now doubled end ring pair.
Notes
Jellybeans on Parade as a weave is somewhat simple to understand and create. While it looks best in a vertical orientation, it still maintains a decent appearance when laid flat. With its cylindrical cross-section, the weave proves versatile for crafting bracelets, necklaces, chokers, and cords. The combination of its playful nature and ease of creation makes Jellybeans on Parade a recommended weave to add to your skill set.
Pictures
Vertical
Vertical: Profile
Flat
Flat: Profile
In Process
